Search results

This study aims to reduce the redundant weight of the anti-roll torsion bar brought by the traditional empirical design and improving its strength and stiffness.

Based on the finite element approach coupled with the improved beluga whale optimization (IBWO) algorithm, a collaborative optimization method is suggested to optimize the design of the anti-roll torsion bar structure and weight. The dimensions and material properties of the torsion bar were defined as random variables, and the torsion bar's mass and strength were investigated using finite elements. Then, chaotic mapping and differential evolution (DE) operators are introduced to improve the beluga whale optimization (BWO) algorithm and run case studies.

The findings demonstrate that the IBWO has superior solution set distribution uniformity, convergence speed, solution correctness and stability than the BWO. The IBWO algorithm is used to optimize the anti-roll torsion bar design. The error between the optimization and finite element simulation results was less than 1%. The weight of the optimized anti-roll torsion bar was lessened by 4%, the maximum stress was reduced by 35% and the stiffness was increased by 1.9%.

The study provides a methodological reference for the simulation optimization process of the lateral anti-roll torsion bar.

Once an uneven substrate is aligned, traditional control theories and methods can be used on it, so aligning is of great significance for the development of wire and arc additive manufacturing (WAAM). This paper aims to propose a shape-driven control method for aligning a substrate with slopes to expand the application of WAAM.

A substrate with slopes must be aligned by depositing weld beads with slopes. First, considering the large height differences of slopes, multi-layer deposition is needed, and the number of layer of weld beads must be ascertained. Second, the change in the deposition rate is controlled as a ramp function to generate weld beads with slopes. Third, the variation of the deposition rate must be fine-tuned to compensate for the deviation between the actual and theoretical layer heights at the deposition of each layer. Finally, the parameters of the ramp functions at the deposition of each layer are determined through an optimization method.

First, to model the response function of layer height to deposition rate, the experiments are conducted with the deposition rate jumping from 4 to 8 mm/s and from 8 to 4 mm/s. When the deposition rate jumps from 4 to 8 mm/s and from 8 to 4 mm/s, the difference in the height of each layer decreases as the number of layer increases. Second, the variation of the deposition rate can be fine-tuned based on the deviation between the measured and theoretical layer heights because the variation of the deposition rate is proportional to the layer height when the initial and end deposition rates are near 4 or 8 mm/s, respectively. Third, the experimental results demonstrate that the proposed method is effective for single-layer aligning and aligning a substrate with one or more slopes.

The proposed method can expand the application of WAAM to an uneven substrate with slopes and lays the foundation for aligning tasks focused on uneven substrates with more complex shapes.

Based on the survey data of 650 kiwi growers from Shaanxi and Sichuan provinces, this paper used multiple endogenous transformation regression models to explore the effect of the joint adoption of green production technology on farmer’s welfare. The purpose of the study is to analyze the influence of green production technology on the yield, household income and socioeconomic characteristics of Kiwi fruit growers.

In the context of the study, multiple endogenous transformation model (MESR) are adopted, but self-actualization tactics were adopted to deal with the instrumental variables. The empirical data has been collected via a combined hierarchical sampling and random sampling, whereas a well-structured Likert scale questionnaire was adopted as well. The empirical data has been processed with the help of STATA 15.1 version.

The study found a positive impact of adopting green production technology. Moreover, the joint adoption of green production technology by kiwi growers has significantly increased the yield, economic values of Kiwi and household income of kiwi farmers. The households with higher asset value, better land quality, weaker credit constraints, more technical training and stronger government promotion and support from local governments are the most likely to adopt pest control technology and soil management technology jointly.

The prime innovation of the paper is to measure the impact of technology combination adoption on farmer’s welfare is evaluated, rather than the impact of single sub technology on farmer’s’ welfare.

The purpose of this paper is to examine the destructive effects of stretch goals on employees’ work–family conflict (WFC). Drawing on the conservation of resources (COR) theory, this study examines the mediating role of resource scarcity. By integrating the paradox theory with the COR theory, this study explores the moderating role of employees’ paradox mind-set.

Two-wave data were collected from a sample of MBA students in Northwestern China (N = 294). PROCESS was used to assess a moderated mediation model.

This study found a positive relationship between stretch goals and WFC, and resource scarcity mediated this relationship. For employees with a high paradox mind-set, the relationship between resource scarcity and WFC was weak; and the indirect effect of stretch goals on WFC via resource scarcity was weak.

Organizations should provide enough resources to employees when using stretch goals. Human resource managers could recruit candidates with high paradox mind-set and foster employees’ paradox mind-set through training.

This study makes contributions to the literature on stretch goals by examining the negative spillover effect of stretch goals on the family domain and exploring the mediating mechanism. This study also extends the paradox theory by using it at micro level to address questions on WFC.

Stab-resistant body armor (SRBA) is used to protect the body from sharp knives. However, most SRBA materials currently have the disadvantages of large weight and thickness. This paper aims to prepare lightweight and high-performance SRBA by 3D printing truss structure and resin-filling method.

The stab resistance truss structure was prepared by the fused deposition modeling method, and the composite structure was formed after filling with resin for dynamic and quasi-static stab tests. The optimized structural plate can meet the standard GA68-2019. Digital image correlation technology was used to analyze the local strain changes during puncture. The puncture failure mode was summarized by the final failure morphologies. The explicit dynamics module in ANSYS Workbench was used to analyze the design of the overlapped structure stab resistance process in this paper.

The stab resistance performance of the 3D-printed structural plate is affected by the internal filling pattern. The stab resistance performance of 3D-printed structural parts was significantly improved after resin filling. The 50%-diamond-PLA-epoxy, with a thickness of only 5 mm was able to meet the stab resistance standard. Resins are used to increase the strength and hardness of the material but also to increase crack propagation and reduce the toughness of the material. The overlapping semicircular structure was inspired by the exoskeleton structure of the demon iron beetle, which improved the stab resistance between gaps. The truss structure can effectively disperse stress for toughening. The filled resin was reinforced by absorbing impact energy.

The 3D-printed resin-filled truss structure can be used to prepare high-performance stab resistance structural plates, which balance the toughness and strength of the overall structure and ultimately reduce the thickness and weight of the SRBA.

In this study, the Models-3/Community Multiscale Air Quality Model (CMAQ) coupled with the Mesoscale Modeling System Generation 5 (MM5) was employed to simulate the air pollution episodes over East Asia, northern China Plain (NCP), and southern Hebei (SHB), at a grid resolution of 36, 12, and 4 km, respectively in Oct. 2012. The PM₁₀ concentrations over SHB at 12-km are overpredicted with NMBs of 34.6% to 45.7% and also overestimated with that of 72.1% to 97.5% at 4-km which applied such a fine grid resolution over the SHB for the first time. It indicated that the simulation at 12-km performs better than the 4-km which may be related to the spatial allocation of the emissions, the lack of dust emissions and the limitations of model treatments. Five heavy episodes show the characteristics of sawtooth-shaped cycles over the NCP in fall (i.e. the maximum of PM₁₀ was up to 885.1 µg m⁻³ and PM_2.5 was up to 438.4 µg m⁻³ in Handan city) which resulting in the deterioration of visibility and periodically haze days. The concentrations of OC, EC, SO₄²⁻, NO₃⁻ and NH₄⁺ were significantly higher in heavy episodes than non-heavy pollution episodes. In comparison with other cities ([NO₃⁻]/[SO₄²⁻] > 1) at 12-km, the monthly-mean mass ratio of [NO₃⁻]/[SO₄²⁻] at Taiyuan (0.17−0.73), Shijiazhuang (0.28−2.34) was 0.43, 0.84 respectively, which means the stationary sources emissions were more important than the vehicle emission in the source areas. The influence of the regional transportation for pollutants compared with local emission was also an important factor for heavy pollution episodes. The regional joint framework should be established along with controlling the local emission over the SHB in China to improve the air quality.

China has been going through a “museum boom” paralleling the domestic tourism boom since 2000; such growth changed the cultural landscape; museums became a vital characteristic of some Chinese cities for both residents and tourists. Encouraged by this growth, the more ambitious “All-for-one Museum (全域博物馆)” was proposed. The physical boundary between museums and living spaces is infinite ambiguity, challenging the idea of museums as “heterotopias.” This study aims to explore the musealization of urban spaces in the context of anthropology and museology, scrutinizing the cultural-political intentions and meanings of these developments, and seeks to ignite further investigation into the reconstruction of historical imaginaries for tourists and urban populations across related disciplines.

This paper examines two cases in Chinese metropolises, Beijing and Shanghai, to illustrate this development of musealization, that is, how the cities actively leverage museological values and methods to connect with their past. In the Beijing case, the authors explore how the local government is leading the effort to musealize the city; in the Shanghai case, they will see how tourists, especially dweller-tourists, navigate through a curated past story in the city and connect their own experience, memory and identity with the place.

The all-for-one museum creates a museal layer projected onto the bigger urban space, even though the authenticity of the “past” is challenged by the modernization development of the city. The authors also find out that for some tourists (especially dweller-tourists), an existential sense of authenticity plays a more significant role as they not only seek to sightsee the past of the city but also to take part in its creation.

This paper discusses two kinds of musealization in cosmopolitan cities of Beijing and Shanghai: top-down and bottom-up. It approaches questions about the musealization of urban spaces from the perspectives of anthropology and museology, and discusses musealization in the specific historical context of China’s modernization process.

Over the last two decades, green supply chain management (GSCM) has enabled businesses to operate in an environmentally friendly manner. The present review examines 234 research articles and proposes a methodical literature review on GSCM, focusing on the aspects of sustainable development.

The work examines conceptual, analytical, empirical and non-empirical research articles, analyzing at all levels of the organization, such as firm, dyad, supply chain and network. The objective of the review is to provide insights into the state and scope of existing research in the domain of GSCM, to identify the prevalence of GSCM and to consolidate the trend of future research. The literature review follows a systematic methodology for analyzing the literature.

The findings can support researchers in identifying research areas with significant impact and streamline research on GSCM in the future. Practitioners can utilize this structured classification to strategize their green initiatives in their firms.

The work contributes to providing literature that explores a detailed review in GSCM. The proposed literature review captures critical aspects in the domain of GSCM and offers future research directions.

This study aims to understand the epistemic foundation of the classification applied in the first Chinese library catalogue, the Seven Epitomes (Qilue).

Originating from a theoretical stance that situates knowledge organization in its social context, the study applies a multifaceted framework pertaining to five categories of textual data: the Seven Epitomes; biographical information about the classificationist Liu Xin; and the relevant intellectual, political, and technological history.

The study discovers seven principles contributing to the epistemic foundation of the catalogue's classification: the Han imperial library collection imposed as the literary warrant; government functions considered for structuring texts; classicist morality determining the main classificatory structure; knowledge perceived and organized as a unity; objects, rather than subjects, of concern affecting categories at the main class level; correlative thinking connecting all text categories to a supreme knowledge embodied by the Six Classics; and classicist moral values resulting in both vertical and horizontal hierarchies among categories as well as texts.

A major limitation of the study is its focus on the main classes, with limited attention to subclasses. Future research can extend the analysis to examine subclasses of the same scheme. Findings from these studies may lead to a comparison between the epistemic approach in the target classification and the analytic one common in today's bibliographic classification.

The study is the first to examine in depth the epistemic foundation of traditional Chinese bibliographic classification, anchoring the classification in its appropriate social and historical context.

This article has been withdrawn as it was published elsewhere and accidentally duplicated. The original article can be seen here: 10.1108/00022660410545483. When citing the article, please cite: Zhe-Min Wu, Chi Chen, Gao-Lian Liu, (2004), “Multipoint inverse shape design of airfoils based on variable-domain variational principle”, Aircraft Engineering and Aerospace Technology, Vol. 76 Iss: 4, pp. 376-38.